1 Overview
ARD series low voltage motor protector with protection functions such as overload, phase failure, unbalance, underload, ground/leakage, and stall. It can be combined with electrical components such as contactors and motor starters to form a motor control protection unit with remote automatic control, on-site direct control, panel indication, signal alarm, fieldbus communication and other functions. Can be widely used in the power distribution field of coal, petrochemical, smelting, electric power, construction and other industries.
2 Product selection
2.1 digital motor protector
● Model description

● rated current
Table 1



Note: >250kW low-voltage motor, 800A rated motor protector can be selected when the rated current is less than 800A.
● Starting method
Note:
1. Manual mode: The protector participates in the control. When the start mode is direct start (full pressure start) and the two-way start, the protector is set to manual mode.
2. Two-step mode: When the protector participates in the control, when the starting mode is star/delta start (two relays) and autotransformer (two relays), the protector is set to two-step mode.
● Additional features
Note: 1. “√” indicates an additional function that can be selected.
2. Measurement range of temperature protection: thermal resistance 100Ω~30kΩ.
●Display mode
Note: For customers without display requirements, a 90L display unit must be ordered in a batch of orders for debugging purposes.
● Product specifications



Note:
1. “■” is the standard function and “□” is the optional function.
2, optional loss of pressure lifting (anti-shake) function with voltage and fault record function.
● Technical indicators

2.2 modular motor protector
● Model description
● Body switch type
Table 6
Measurement module
Table 7
Additional features
Table 8
● Function configuration
● Technical indicators
2.3 Product Introduction
2.3.1 ARD2 (L) motor protector
● Shape and installation size (unit: mm)
Main module
Transformer
● Terminal block
2.3.2 ARD2F, ARD3 motor protector
Shape and installation size (unit: mm)
Main module
Display unit
Anti-shake module
AC380V power module
Transformer
Same as ARD2 (L) transformer part
● Terminal block
2.3.3 ARD3T Motor Protector
Shape and installation size (unit: mm)
Main module:
Measurement module:
Current measurement module
Current + voltage measurement module
Temperature, analog, and switching modules:
Communication module:
Display module:
External current transformer:
Leakage current transformer:
Terminals
Main module
Measurement module
Analog module
Temperature module
Two-wire system
Three-wire system
Switch module
Communication module