1. Electrical fire monitoring equipment should be installed in the fire control room or on duty; when there is a fire control room, and the alarm information and fault information of the electrical fire monitoring equipment are transmitted to the fire control room, the electrical fire monitoring equipment can be set at Near the protected area.
2. The alarm information and fault information of the electrical fire monitoring equipment can be connected to the graphic display device of the fire control room set in the fire control room for centralized display; however, the display of these information should be clearly distinguished from the fire alarm information and the flammable gas alarm information display.
3. The installation and setting of electrical fire monitoring equipment should refer to the setting requirements of the fire alarm controller.
4. When there is a linkage requirement in the protection area, the output control can be controlled by the electrical fire monitoring equipment itself, or the output control can be controlled by the fire linkage controller.